How To Clear A Green Pool Promptly

I am pretty sure that pool owners have already gotten a nightmare with the pool when the pool is unclean, especially the color of water has been changed from the blue to dark green ones.

Skim and Vacuum

The state and the color of the water are the signals of the filthy pools, so you should not swim these pools unless bacteria and other germs are able to visit your body parts freely. To remove the bad state of your pool, you could empty the dirty water immediately, but how to clear a green pool as quickly as you can?

Before starting the cleaning process for your pool, you should realize two main points – that is you need to gear up the filter system and putting the true chemicals. Then, you would follow these step as under.

Phase 1 – Begin the process

Step 1: Check the state of the water

To check the state of the water, you should buy the chemical testing kit firstly. Then, you use this testing kit to check the pH and the chlorine levels in order to control the water in your pool. If the chlorine levels decrease below 1ppm, it could have the algae to grow in your pool and lead the water to be more dark green.

Step 2: Stabilize the chemicals in the pool

When testing the pH levels, you will know that you should add more sodium carbonate or reduce the amount of sodium bisulfate depending on the state of the water. Increase the acid level if you want to take the algae away from the water. To stabilize the pH levels, you should open the pump in order to flow the chemicals as well as the water in the pool.

Step 3: Draw attention to the filter

You will miss out the filter and get much attention to the pool when seeing the green pool. However, the filter of the pool contributes how dirty your pool is as it has the debris, leaves, and sticks, etc.

Therefore, you should clean the filter before putting the chemicals in the water to ensure the filter is empty to continue to run 24 hours per day.

Step 4: Do not forget the bottom and the sides of the pool

The bottom and other sides of the pool are difficult to realize how dirty they are, but you still need to undertake these areas to ensure that you have already cleaned off hard things like the algae by using the pool brush before adding the chemicals to the water.

Phase 2 – clean the pool

Step 1: Use the pool shock

The pool shock has the levels of chlorine to take the algae and bacteria away from your pool promptly. You might put more the pool shock if a number of algae and bacteria increase in order to get out these species of your pool. The water could be dirty and overcast once you put the power shock, but this state will be eliminated in the filter and the water is white again.

Step 2: Do not forget to take care of your pool regularly

One of the biggest reasons of the dirty pool are the filter are soiled. A number of bacteria and algae usually live in the filter that you do not know. So, the best way to prevent this situation is cleaning the filter routinely and your pool will give you a big thank.

Step 3: Use the pool vacuum

To have the double – check cleaning process, you should also use the pool vacuum or the best robotic pool cleaner for fiberglass pool to diminish the debris, the algae, and bacteria in every side of the pool.

If the vacuum could not absorb the debris and the algae in some small corner of the walls, then you could take the brush to help you do it.

On the flip side, you should take time to read the best automatic pool cleaner reviews to recognize the quality of it as well as preparing for new purchases in the upcoming time.

Phase 3 – Close the cleaning process

Step 1: Observe the filter

Once you have already cleaned the filter, you should observe the filter to check it. Make sure the debris, dead algae, and bacteria do not have the opportunity to live in the filer anymore. If not yet, then you would use the pool shock again.

Step 2: Check the chemical levels again before jumping into the pool

Now, you are very excited to swim in your pool as you think that the pool is washed carefully. Hold on, you should postpone doing this activity in a short period of time.

You may wonder “why will you have to test the chemical levels again?” The question is you should ensure the pH and the chlorine levels are in stable span before jumping into the pool.

Read more: Above Ground Pool For Money.


Now, it is time to dive into your pool again. To be free on swimming your pool, you should undertake some daunting tasks beforehand. It is not tricky than you may think, but it requires you should be careful and hard – working to solve this issue completely. Continue to love your swimming pool again is not a bad choice.

8 Tips For Keeping Your Pool Available All The Time

When the swim season closes, you might want to clean it, especially in the winter. Nonetheless, if you need to open the pools all of the seasons, then you should have the solutions to keep your pool always open, best automatic pool cleaner for above ground pools is an example. Here are eight secret tips for keeping your pools available around the years.

swimming pool

Use the solar energy

In the cold season, temperature becomes a nightmare for your pool to keep water is lukewarm and it could not turn into ice.

One of the greatest solution to keep it warm is use the solar energy, but where does the solar source come from? The answer is the solar sheets. These panels could absorb the heat even if we do not see the sun in the winter.

Build a pool heater

You are able to make a pool heater and enjoy swimming during the winter time is another excellent way to try.

The major disadvantage of this solution is you will have several bills because the pool heater needs to use the electricity regularly.

Avoid the state of unwashed

Whether you use the pool or not in the winter or summer season, you should retain the pool hygienic by washing it frequently.

The dirt, debris, and dust always exist in the water on your pool even if no one swim especially in the autumn, the leaves could appear outside in the pool and make it clean again.

These leaves are able to block all of the pipes in the pool and dirty water could not flow out of the pool.

On the flip side, the fall and summer season is the peak time to wipe the pool, but the winter season also needs to do this job to keep it clean in the spring, too.

Some pool owner might think of a robotic cleaner, and they would find the best electric robotic pool cleaner in this task.

Check water on the pool automatically

Why do you need to check the quality of water all the time? Because bacteria and algae continue to develop in water whereas you do not swim in the winter.

Thus, you should control the pH levels and check the chlorine levels to keep these levels fluctuate in suitable scales no matter how the weather is.

Do not forget to use the pump

To keep water clean all the time, you should open the pump as it helps water washed, and it also prevents the freezing state in the cold season.

Therefore, you need to open the pump daily to keep the quality of water ranges in great scale whether you use it or not.

Insert the freeze protection

The freeze protection is a monitor to test and handle the outside temperature and automatically run the pump when the winter comes.

Furthermore, you could get the freeze protection while running the pump, and you do not concern about the temperature in the cold season.

Deal with the lack of energy

The lack of electricity in the cold weather could be another nightmare for those who have the swimming pool in their houses if they want to open the pump and the heat all the time.

If the electricity loss, you should release the drain plugs on the pump, the heater, and the filter. Then, you need to close the breaker to prevent the potential accident when the electricity is opened again.

Do not forget to close the line valves and unlock the air bleeder on the pool to wait for the power. When the electricity is opened, you need to remove the plugs and switch on the pump again. You should check the damage and water leaking while starting the pump.

Block the pool if you could not control it smoothly during the winter time

You do not buy the freeze protection, check the quality of water or a pool heater, then the last solution for you is close the pool in the winter.

We completely know the blue water is very amazing when observing the color of the pool, but it could be an actual issue if you do not have enough time, budget and ability to handle it.

In this situation, you should prepare to close the pool by blocking the pump system and open the pipes to get water out of the pool. Then, you will wait for the spring season to come back the pool again.


Open or close your pool in the winter season is your own option, it does not mean a good or bad idea. You also might ask the advice from the pool dealer or other experienced pool owners in your region before making your own decision. If you agree to open it during the cold time, then could consider and follow above tips to protect the pool.